Jan-Feb/2019 In our ongoing effort to bring our customers the latest most useful products, here are our latest additions.

Looking at our home page you will notice two new categories at the bottom right of the page. 

                   USB Chargers / Power Points 

     An after-market add on, the USB Power and service ports for phones, tablets and other mobile devices are gre for 12V and 24V systems.

Blue Sea 1016 2.1A Dual USB Charge Port



You can charge two mobile devices on the go. They are Compatible with most popular mobile devices Internal fusing, the Conformal coated circuit board works well in a harsh marine environment. The protective dust cap keeps debris and moisture out. You can install in existing 12V DC socket…( more on website)

______________________________________________________________________________

Blue Sea 1039 Fast Charge 4.8 Dual USB

Intelligent device recognition maximizes the charge rate for phones, tablets or other mobile devices. They charge at the speed required by specific devices internal filtering for reduced electronic interference, over temperature protection, also Conformal coated (more on the website…)

______________________________________________________________________________

Blue Sea 1045 Fast Charge 4.8 Dual USB

Intelligent device recognition maximizes charge rate for phones, tablets or other mobile devices Charges at the speed required by specific devices. Internal filtering for reduced electronic interference Over temperature protection. Conformal coated…

With the proliferation of USB powered and connected devices, these USB power point and connecting devices are just the thing to add more capability to your current car, boat, RV or what have you.  Designed to fit in current socket styles,  installation will be a breeze. The round options work well where you don’t have a pre-made socket. Just drill a hole!

Please see the website for additional information and pricing.  
https://theelectricaldepot.com/usb-chargers-power-points

March 2019

General Technologies Corp – Engine Ignition Analyzers.


          Manufacturers of diagnostic and test equipment for use in all types of vehicles. These product range includes: digital tachometers, laser tachometers, ignition testers and analyzers, DC wiring faultfinders, multimeters, high and low current clamp meters, cordless circuit testers, infrared thermometers, oxygen sensor testers and simulators.

                

The GTC505 Engine Ignition Analyzer is a handheld instrument designed from the ground up for the diagnosis and performance measurement of all types of spark ignition systems, from conventional to the newest Coil on Plug- in use.

Capable of displaying and measuring the following in real time: secondary ignition waveform, primary coil current ramp time, dwell time, spark burn time and RPM. It also provides two innovative and unique display formats used to compare measurements between cylinders, and to look at data for hundreds of spark events over time in order to detect intermittent problems, misfires and other performance issues which are very difficult to detect using conventional scopes.

This hand held device is powered by a rechargeable lithium battery, which provides up to 8 hours of battery life and uses a fast response 3.5″ color TFT display with a bright backlight and wide viewing angle.

  Features

  • Display waveforms in real time
  • Detect and display dwell angle (in high voltage sparkplug-wire systems), and ramp time (for COP systems)
  • Graph burn time, spark plug voltage, dwell/ramp time, and RPM for each spark, allowing for detection of misfires
  • Compare readings between cylinders with a “candlestick” graph that displays maximum, minimum, and average readings for each cylinder
  • Display everything on a 3.5″ color TFT LCD screen
  • Rechargeable Li-Ion battery provide 6+ hours of working time
  • Pass the rigorous “MIL-STD-810” drop test
  • Multiple sensors and hook-up optionsAll specially designed for use with the GTC505
  • 2 m (74”) shielded coaxial cable with BNC and sensor connector
  • 30 cm (12”) shielded flexible goosneck with BNC and sensor connector
  • Cable and flexible gooseneck can be use with any sensor
  • Electrically shielded clip-on and spark plug wire sensors fit up to 8 mm diameter wires
  • Active coil on plug (COP) sensor for optimal signal detection and rejection of interferance from other ignition modules
  • Automatic detection and configuration of the sensors

Technical Specifications

RPM

Spark (peak) voltage 

Spark burn (firing) time

Ignition primary current ramp time (COP mode)

Dwell time (spark plug wire) 

  • Display: 3.5″ Color TFT (320×240 pixels)
  • Ignition system compatibility: magneto, conventional distributor, waste spark (DIS), coil near plug, coil on plug, etc.
  • Engine cycle: 2, 4 and waste spark (DIS)
  • Probe: 12″ (30 cm) 30 cm (12”) long coaxial gooseneck with BNC and sensor connector
  • Extension cable: 2 m (74”) (30 cm) coaxial cable with BNC and sensor connector
  • Coil on plug sensor: Active type, 14 mm x 52 mm
  • Spark plug wire sensor: Shielded capacitive type, 35x13x13 mm, with 8.5 mm opening
  • Input USB-micro connector: 5.0 volt, 500 mA maximum
  • Clip-on spark plug wire sensor: Shielded capacitive type, 24×75 mm, with 8.5 mm opening
  • Internal Power Source: 1500 mA/h rechargeable LiFePO4 battery
  • Battery life: 6+ hours of working time when starting with a fully charged battery
  • Power Saving: Auto power off
  • Physical dimensions : 6.5″(H) x 4.9″(W) x 1.4″(D)or 165 mm x 124 mm x 36 mm (without probe or cable)
  • Weight: 14.8 oz or 420 g (without probe or cable)
  • Range: 120 to 19,999 RPM
  • Resolution: 1 RPM
  • Accuracy: ±0.5% + 1 LSD
  • Range: 0 to 50 kV
  • Resolution: 0.1 kV
  • Repetitivity: ±0.2 kV
  • Range: 0 to 10.0 mS
  • Resolution: 0.1 mS
  • Accuracy: ±0.1 mS + 1 LSD
  • Range: 0 to 10.0 mS
  • Resolution: 0.1 mS
  • Accuracy: ±0.1 mS + 1 LSD
  • range: 0 to 10.0 mS
  • Resolution: 0.1 mS
  • Accuracy: ±0.1 mS + 1 LSD



Includes:

  • GTC505
  • Flexible probe
  • Extension cable
  • Coil on plug (COP) active sensor
  • Spark plug wire (SPW) shielded capacitive sensor
  • Clip-on spark plug wire shielded capacitive sensor
  • USB micro cable and AC charger adapter
  • Protective rubber holster
  • Hard padded case for carrying and storage
  • User’s manual



GTC CM100 1 mA to 100 Amps AC/DC Low Current Clamp Meter

CM 100

  CM100 1 mA to 100 Amps AC/DC Low Current Clamp Meter

  The CM100 low current clamp meter is designed to accurately measure current, current leaks (parasitic draws down to 1mA) and electrical loads from 1mA to 100 amp AC/DC and voltages from 0 to 600 AC/DC. The CM100 low current clamp meter is designed to accurately measure current, current leaks (parasitic draws down to 1mA) and electrical loads from 1mA to 100 amp AC/DC and voltages from 0 to 600 AC/DC.


GTC CM600 600 Amps AC/DC Current Clamp Meter

CM600 600 Amps AC/DC Current Clamp Meter With its auto-range and high sensitivity, the CM600 current clamp meter allows the measurement of AC/DC currents with a resolution down to 0.1 A, and up to a maximum of 600A, making it ideal for testing all kinds of loads

GTC CM1000 1000 Amps AC/DC Current Clamp Meter

DC Current Equipped with  auto-range and high current measurement capability, the CM1000 current clamp meter allows the measurement of AC/DC currents with a resolution down to 0.1 A, and up to a maximum of 1000A, making it ideal for testing…

GTC8017

GTC8017 Autorange Multimeter General Technologies Corp.

CT8017 3 3⁄4 Digits Auto range Multimeter Main Features Full auto range features Large 33⁄4 digit display with 40 segment analog bar graph AC/DC Voltage measurement up to 600 Volt AC/DC Current up to 10 A Resistance measurement up to 32 MOhm Continuity.  DC Current Equipped with  auto-range and high current measurement capability, the CM1000 current clamp meter allows the measurement of AC/DC currents with a resolution down to 0.1 A, and up to a maximum of 1000A, making it ideal for testing...


GTC8027 Professional Automotive Digital Multimeter General Technologies Corp.
multiMeter.

Professional Automotive Digital Multimeter Quick and easy to use.  The smaller and ergonomic profile compared with previous models makes handling and operation easier and more convenient Single knob selects function.

For questions on any of our products: info@theelectricaldepot.com expect a quick response.