Part Number: CM600
Manufactured by: General Technologies Corp.
$141.75
CM600
600 Amps AC/DC Current Clamp Meter
With its auto-range and high sensitivity, the CM600 current clamp meter allows the measurement of AC/DC currents with a resolution down to 0.1 A, and up to a maximum of 600A, making it ideal for testing all kinds of loads such as found in: electric motors, fuel pumps, charging systems, starter currents, alternators, etc.
The CM600 features a small and narrow jaw, which can accept cables up to 1" (25.4mm) in diameter and be used in confined spaces, wire bundles, and small gauge wires. Other features include up to 600 Volts AC/DC voltage and resistance measurement functions, continuity test (with buzzer), and display hold and peak detector functions.
Includes
CM600
Soft Pouch
2 x 35½" (0.9 m) Test probes
2 x 1.5 V AAA alkaline battery
User's Manual
Features
No Ground or clip required
Clamp opens up to 1 inch (25.4 mm)
One rotary switch operation
Large 4 digit LCD display
AC/DC Voltage measurement up to 600 Volt
AC/DC current measurement up to 600 A
Relative measurement
One touch auto zero
Peak Hold Function
Data Hold Function
Resistance measurement
2 readings per second sampling
Continuity check with audible indicator
Protective hand guard
Low battery indicator
Auto power off
50 hrs in use battery life
Soft carrying deluxe pouch
Test leads and batteries included.
Technical Specifications
Display:
4 Digit LCD (Max. reading 600.0)
0.393"(10 mm) Digits
Units indicator
Relative measure indicator
Display data hold indicator
Peak hold indicator
VDC/VAC indicator
Continuity indicator
Automatic over-range indication
Automatic( - ) negative polarity indicator
One touch button auto zeroing
Auto power off
Low battery indicator
Power source: Two (2) Standard AAA 1.5 Volt alkaline battery type AAA UM4 or equivalent
Test probes: One red and one black, 1000V/15A rated (IEC1010/EN61010 CAT II), 35½" long
Physical dimensions: 7.44" (H) x 2.75" (W) x 1.33" (D) - 189mm (H) x 70 mm (W) x 34 mm (D)
Weight: Approximately 7.76 Oz ( 220 g) including battery
Applications
Measure currents in circuits like battery chargers, alternators, leakage currents, electrical loads, etc.
Check grounds, Voltage drops and continuity across Connectors, Wires, Cables, Relays Contacts, Lamps, Switches, etc.
Check components like Alternator, Diodes, Relays Coils, Condensers, Ignition Coils, Spark Plug Wires, Magnetic Pick-ups, Motors, Switches, Fuses, etc.
An essential tool for all around troubleshooting of electrical and electronic circuit and systems.
Electrical Specifications
DC Voltage: ± 1% ± 2 dgts., 600 V ac/dc maximum, 660Vrms overload protection
AC Voltage: ±1.5% ± 5 dgts., 50 to 500 Hz, 660 V ac/dc maximum, 660Vrms overload protection
DC Current: ± 2.5 % ± 10 dgts., 600 Amp. maximum, 660Arms overload protection
AC Current: ± 2 % ± 10 dgts., 600 Amp. maximum, 660Arms overload protection
Resistance: ±1% ± 3 dgts., 660Vrms overload protection
Continuity Test: Audible indicator (Buzzer) when circuit resistance is below 100 Ω, max. voltage test < 3 Vdc.
For use in
Electronic and electrical circuits
Automobiles
Trucks
Trailers
Boats
RVs
All 0 to 600 Volt AC/ DC powered circuits
Add to Cart: